Mackie 406M 500-Watt RMS/2-Ohm Mono Powered Mixer

Find:
Advanced Search
All categories
Mixers

Support:
Customer Service

Main Categories:
Band Instruments
Bass Guitar
By Manufacturer
DJ Gear
Drums
Guitars
Keyboards
Lighting Equipment
Live Sound
Recording Equipment

In association with

TGI HOME

Mackie 406M 500-Watt RMS/2-Ohm Mono Powered Mixer Product code: SKU Manufacturer: Mackie Price: $549.00

5% discount coupon: Enter AFF01 at checkout for 5% off any purchase

Mackie 406M 500-Watt RMS/2-Ohm Mono Powered Mixer

Powered Mixers for Professionals

The PPM Series 406M features:

• 500 real watts/2 ohms from twin 250-watt FR Series High-Current power amps
• Power amps switchable as mains or main plus monitor
• 6 mic/line channels with master phantom power
• Inserts on all 6 channels
• Active 3-band EQ on each channel
• 2 separate 9-band, audiophile-quality graphic EQs-- one on mains and one on monitor

All PPM Series Powered Mixers feature:

• Rugged injection-molded chassis resists impacts that would destroy a rat-fur-covered wood box powered mixer. Built-in handle can be used by folks who don't have the foggiest idea of what injection molding is.
• A real Mackie mic/line mixer section! Based on our world-famous MicroSeries 1202-VLZ and enhanced with new mic preamps and about a gazillion ingenious extra features.
• Rugged, sealed rotary controls resist dust, moisture and other contamination.
• Expensive, studio-grade, 9-band program equalizers for mains and monitor that utilize multiple summing amplifiers and precision infinite feedback band-pass filters, which yield superior linear-phase and combining properties. What this means is our graphic EQs are exceptionally low-noise, low-distortion, sound great, and don't suffer from any nasty phase-shift problems.
• Level-setting control & LED on every PPM mixer channel-makes setting input levels a snap.
• Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact.
• Amp routing switch assigns power amps to mains or mains + monitors.
• Hefty 10,000µf storage capacitors for high peak power reserves.
• Massive toroid transformer for high current output.

PPM Series heat sink

Mega-cool die-cast heat sink. 1-piece die-cast heat sink is custom-cast for maximum heat dissipation and minimum car upholstery destruction. Black coating improves efficiency by 15%. Running Man figure improves coolness-factor by 150%.

Specification:

• Frequency Response
  • Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz
  • Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz
• Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz
  • Mic Input to Main Mixer Output < 0.005% at +4 dBu output
  • Mic Input to Power Amp Output < 0.15% 250 mW to rated power
• Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB
• Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence
  • Equivalent Input Noise (EIN): -127 dBu
  • Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu
  • Main Mixer Output Noise
    • with Master at nominal (-10dB), all channels off: -92 dBu
    • with Master and one input at nominal (-10dB and -20dB), Trim at 0dB: -85 dBu
• Crosstalk, at 1 kiloHertz:
  • Adjacent Inputs or Input to Output: -90 dB
  • Fader Off: -90 dB
  • Break Switch Mute: -80 dB
• Input Level Trim Control Range: 0 to -40dB
• Phantom Power: +15V DC
• Equalization:
  • Rumble Reduction 75hz, -18dB/octave
  • Channel EQ
    • High ±15dB at 12kHz
    • Mid ±12dB at 2.5kHz
    • Low ±15dB at 80Hz
  • Graphic EQ: 9 bands, ±15dB, Q=1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16KHz
• Main Mixer Section Rated Output:
  • Main Mixer, Monitor, and Effects +4 dBu
  • Maximum Main Mixer Section Output +20 dBu
• Input Sensitivity (Minimum Input Level to produce +4dBu at Main Mixer Output)
  • Mic Input: -68dBu
  • Insert Input: -28dBu
  • Line Input: -48dBu
  • Stereo Line Input: -28dBu
  • Tape Input: -18dBu
  • Effects Return: -18dBu
• Maximum Voltage Gain:
  • Mic Input to…
    • Insert Output: 40dB
    • Tape Output: 60dB
    • Main Mixer Output: 72dB
  • Line Input (Mono) to…
    • Insert Output: 20dB
    • Tape Output: 20dB
    • Main Mixer Output: 52dB
  • Stereo Line Input to…
    • Tape Output: 20dB
    • Main Mixer Output: 32dB
  • Tape Input to…
    • Tape Output: 10dB
    • Main Mixer Output: 22dB
  • Effects Return to…
    • Main Mixer Output: 22dB
    • Monitor Output: 22dB
• Input Impedance:
  • Mic Input balanced 3 kilohms
  • Insert Input unbalanced 10 kilohms
  • Line Input balanced 40 kilohms
  • Stereo Line Input unbalanced 10 kilohms
  • Tape Input unbalanced 10 kilohms
  • Effects Return unbalanced 10 kilohms
  • Power Amp In unbalanced 10 kilohms
• Output Impedance
  • Main Mixer Output 150 ohms
  • Insert Output 150 ohms
  • Tape Output 150 ohms
  • Monitor Output 150 ohms
  • Effects Send 150 ohms
  • Power Amp Out 0.032 ohms at 1kHz
• Digital Effects:
  • Resolution 32-bit EMAC internal processing, 2-channel
  • Sample Rate 31.25 kHz
  • Bandwidth 15.6 kHz
• VU Meters: Main and Monitor, eight segments Clip, +5, 0, -5, -10, -15, -20, -30
• Maximum Power at 1% THD, midband (both channels driven)
  • 2 ohms: 250W x 250W per channel
  • 4 ohms: 200W x 200W per channel
  • 8 ohms: 125W x 125W per channel
  • 2 ohms: 500W total
• Continuous Sine Wave Average Output Power, 40Hz to 20kHz (both channels driven at rated power)
  • 180W per channel: 4 ohms, no more than 0.15% THD
  • 110W per channel: 8 ohms, no more than 0.10% THD
• Power Bandwidth: <10Hz to 30kHz (+0, -1dB) at rated power into 4 ohms
• Frequency Response
  • <10Hz to 30kHz (+0, -1dB)
  • <10Hz to 55kHz (+0, -3dB)
• Distortion (THD, SMPTE IMD):
  • 4 ohms: <0.15%
  • 8 ohms: <0.10%
• Signal-to-Noise Ratio: <105dB below rated power into 8 ohms
• Channel Separation: >75dB at1 kHz
• Damping Factor: >250dB at1 kHz
• Amp Input Impedance: 10k ohms unbalanced, 20k ohms balanced
• Continuous Sine Wave Average Output Power (both channels driven at rated power into 4 ohms): 1.35V (+4.8dBu)
• Gain (amp in to speaker out): 26.4dB(21V/V)
• Maximum Input Level: 9.75V (+22dBu)
• Rise Time: < 5µs
• Slew Rate: > 40V/µs
• Load Angle:
  • 8 ohms, time independent: 8 (±jx)
  • 4 ohms, time dependent: 4 (±jx)
• High Frequency Overload and Latching: No latch up at any frequency or level
• High Frequency Stability: Unconditionally stable driving any reactive or capacitive load
• Physical:
  • Height: 11.7 inches (297mm)
  • Width: 20.5 inches (521mm)
  • Overall Depth: 13 inches (330mm)
  • Weight: 32 lbs (14.5 kg)