Furman PL-PROII Conditioner/Light Module

Find:
Advanced Search
All categories
Live Sound Accessories

Support:
Customer Service

Main Categories:
Band Instruments
Bass Guitar
By Manufacturer
DJ Gear
Drums
Guitars
Keyboards
Lighting Equipment
Live Sound
Recording Equipment

In association with

TGI HOME

Furman PL-PROII Conditioner/Light Module Product code: SKU Manufacturer: Furman Price: $290.99

5% discount coupon: Enter AFF01 at checkout for 5% off any purchase

Furman PL-PRO Conditioner/Light Module

DESCRIPTION

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PL-PRO II, PL-PRO D II and PM-PRO II power conditioners, featuring Furman's revolutionary SMP technology. Furman's Series Mode Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT). Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor.

SMP (Series Mode Protection)

Furman's maintenance-free SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits "sacrifi ce" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. With Furman's SMP, however, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrifi ced parts, no service calls, no down time.

Unique to Furman's SMP is its unparalleled clamping voltage. Unlike some series mode suppressors, Furman's maintenance free feature is not at the expense of potential equipment failure! While other designs offer clamping voltages that are well above 300Vpk, Furman's SMP clamps at 188Vpk, 133 VAC RMS even when tested with multiple 6000Vpk - 3000 amp surges!

This unprecedented level of protection is only available with Furman's SMP technology. Additionally, Furman's trusted over-voltage circuitry protects against all too frequent open neutral wiring, or accidental connections to 208 or 240 VAC. Furman's SMP with over voltage protection immediately shuts off the incoming power until the over voltage condition is corrected.

LiFT (Linear Filtering Technology)

Unfortunately, traditional AC conditioners have been designed for unrealistic laboratory conditions. Prior technologies whether multiple pole fi lter or conventional series mode, could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman's SMP with LiFT takes another approach, ensuring optimal performance through linear fi ltering and no leakage to ground.

FEATURES

The PL -PRO II and PL-PRO D II feature LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off.

Additionally, all units include a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation. A front panel mounted master power switch is protected by a hinged cover, preventing accidental disconnection of AC power to the unit's outlets. The front-panel circuit breaker - power switch can be quickly and easily reset should the unit be overloaded. Furman's Series II Pro units also feature a 10 foot, 12 gauge heavy-duty power cable.

OPTIONS

Models PL-PRO II E, PL-PRO DE II, and PM-PRO E II: "E" suffi x versions are for use in countries with 220/240 volt AC lines. Each has ten rear panel outlets, using internationally- accepted IEC-320 connectors. The voltmeter on the PL-PRO E II reads from 180 to 256 VAC, in 4 volt steps.

Specifications:

• Current rating: 20 amps ("E" versions 16 amps)
• Operating Voltage: 90 to 140 VAC ("E" versions 180 to 280 VAC)
• Over Voltage Shutdown: 140 VAC typically ("E" versions 280 VAC typically)
• Voltmeter Accuracy: PL-PRO II only: ±2 VAC, calibrated with internal trimpot adjustments PL-PRO D II & PM-PRO II: ±1.5 VAC
• Spike Protection Modes: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
• Response time: 1 nanosecond
• Maximum surge current: 6,500 amps
• Noise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
• Mechanical: Dimensions: Dimensions: 1.75" H x 19" W x 10.5" D. Weight: 11 lbs (5 kg). Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
• Power consumption: PL-PRO II, 11 watts,PL-PRO D II, 12 watts, PM-PRO II, 12 watts
• Safety Agency Listings: CE, NRTL-C
• Patent number: CA 1332074 (4,901,183)

PL-PRO II, PL-PRO D II, & PM-PRO II ALL FEATURES:

• SMP with extreme voltage shutdown
• LiFT (Linear Filtering Technology) with zero ground contamination
• Two retractable, long-life, low-heat LED light fixtures with dimmer switch for rack illumination (On PL units only)
• BNC connector on the rear panel allows you to attach any standard goose neck lamp to illuminate the rear of your rack
• Eight rear panel outlets and one front panel outlet
• 20 amp rating, with ultra-high inrush capable magnetic circuit breaker
• Three year limited warranty

ADDITIONAL PL-PRO SERIES II FEATURES:

• Front panel 20 segment meter displays incoming AC line voltage ranging from 90 to 128 volts (+/- 2 VAC)